SLAX A small bootable CD containing the Linux operating system.
Download

SLAX Ranking & Summary

SLAX Tags

linux operating system distribution Linux distribution Live CD slax

SLAX Description

A small bootable CD containing the Linux operating system. SLAX is a small bootable CD containing the Linux operating system. SLAX distirbution runs Linux directly from the CD (or USB) without installing.The Live CD described here is based on the Slackware Linux distribution and is downloadable from this website as an ISO image.The primary goal of SLAX is to provide a wide collection of useful software while keeping the cd's image small enough to be written to a 185 MB CD-R(W) medium (small 8 cm CD). SLAX boots directly from the CD or USB devices and it provides a full featured Linux operating system.All your available partitions and data storage devices (CD-ROM, USB storage devices, etc.) should be recognized at boot and should be mounted to /mnt/xx. As an example, "disc0part1" may be assigned to the first partition on your primary hard drive, "disc1part1" for your USB storage device, or "cdrom0" for your CD-ROM drive. SLAX will never write anything to the mounted devices. Mounting is safe and does not change the data.After booting, you should be able to login as a "root", with the password "toor"; both without quotes, of course.When logged in, you have many options. At the shell prompt, you may start Midnight Commander (type "mc" to the console), play some music from your hard drive (type "play /mnt/path/file.mp3"), adjust your audio volume (type "alsamixer"), configure IP address (type "netconfig") or browse web pages with the text-based browser (type "lynx http://url").To start the graphical environment included with SLAX, type "gui" (for graphical user interface). It will attempt to autoconfigure your graphics card, monitor, keyboard and mice, and if successful it will run an X session with KDE. I'm pretty sure that you will know how to get around at this point. :-) Use "guisafe" instead of "gui" for safe-mode (VESA framebuffer) without autodetection.In the unfortunate case your mouse doesn't work, try to move it for a few seconds to see if it will be autodetected. If it isn't, shut down Xwindow (press Ctrl+Alt+Backspace) and start it again. If this won't help then you are using something I have not included in the autoconfiguration process (COM2 mouse?). If you are comfortable with bash, or you atleast understand how to make your favorite mouse function under Linux, try to modify the symbolic link /dev/mouse manually.If you don't like the autoconfigured screen resolution, refresh rate, or the K Desktop Environment, start "gui" with some additional options. Try for example "gui 800x600 60", where 800x600 is the desired screen resolution and 60 is the desired refresh rate. Fluxbox is one of the other window managers included and may be called with "guifast" or "gui fluxbox". In any event, type "gui --help" for more information.All scripts and source code are available and can be used to build your own Live CD.SLAX is available as an ISO image of the CD. It fits on small 8cm CD-R(W). Burn it with your favorite cd-writing software and then boot from the CD.You might want to check your BIOS to assure it's set to boot the CD prior the disc.SLAX CD contains:· Linux Kernel 2.4.28-pre4 with SATA support· X.org 6.8.1· KDE 3.3.1· KOffice 1.3.3· KDE games· MPlayer 1.0pre5 with KPlayer· kopete ICQ/AIM/Y!/IRC· midnight commander· rdesktop (rscp in KDE)· hotplug support· cdrtools· k3b burning GUI for KDE· mutt email client· wget· and much more...Requirements:SLAX is not pretentious, nevertheless it requires some minimal hardware to run properly. It depends what do you wish to use SLAX for, of course. The most important thing is memory. You need at least 30 MB of RAM to boot slax. More detailed description follows: Medium · either IDE connected CDROM (to boot from the CD)· or USB FlashDisk (to boot from the mass storage device)· or maybe some harddisk (to boot SLAX from the disk) BIOS · either non-emulation booting enabled (to boot from the CD)· or USB FlashDrive booting enabled (to boot from the mass storage device) Memory · 30 MB to boot slax.· 64 MB to run Xwindow with fluxbox (guifast)· 128 MB to run Xwindow with KDE (gui or guisafe) Processor · i486 or better, Pentium or AMD are both OK. Peripheral devices · some keyboard· PS/2 or USB connected mouse (required for Xwindow only)· serial (COM) mouse is not automatically recognized, but can be used · Harddisk · No harddisk is required What's New in This Release: · Added fake XDM to 002-xorg, so it will start Fluxbox if KDE is not present - this is mainly useful if you use 'build slax' and you only include Slax Core and Slax Xorg; upgraded to Slackware 'current' as of the latest changes before KDE 4 packages were added; added new wallpaper; fixed many Fluxbox-related bugs in order to make 'Slax Xorg' partly independent; now you can see (even in Fluxbox) accurate (preferred) screen resolution and it plays a start-up sound too.

SLAX Related Software